2nd International Conference on Advances in Mechanical Engineering

ICAME-2016

29th-30th March 2016

Organized by: 

Amrutvahini College of Engineering, Sangamner

VOLUME 3, SPECIAL ISSUE 1, MARCH 2016


 Aerospace Structures – Conventional Aircraft Wing Box Structure Reinforcement (Idealization) – FEA methodology – [Aerospace Structural Reinforcement]

Alfred J Lazarus

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.01


To study Effect of Crack on Natural Frequency by using FEA

Mr. Ganesh G. Gade, Mr. AmolS.Awari, Mr. Sachin S. Kanawade

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.02


Tractor Driven Soil Filtering Machine

Aniket Gadhave, Sank et Nirbhavane, Ashish Kothawade, Tejas Pardeshi, S. V. Dawange

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.03


Detection of Internal cracks in exhaust tailpipe using FFT Analyzer

Ms. Pallavi G. Kulkarni, Prof. D. S. Chaudhary

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.04


Design and fabrication of regenerative braking system

Chandrakant Rahane, Vaibhav Varpe

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.05


Optimization of Scorpio front suspension (W105) assembly line by using ECRS Principles

Shubham Kothavade, S.P. Deshpande

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.06


Weight Optimization of the Gear Train – A Review

M.S. Navle, Dr. A. V. Damale

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.07


Design and Modelling of 6 In 1 All – Nut Remover for Automobile Wheels

Amol Bhanage, Vijay Bhanage

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.08


Analysis and Optimisation of Robot Pedestal Design using FEA

Ashwini R. Hagawane, Vijay L. Kadlag

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.09


Performance Analysis of Shock Mounts Using FEA

R.S.Aralikatti, V.Y.Patil

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.10


Investigation of Wear and Load Carrying Capacity of Polyamide Composites for Gear Application

B.R.Ambre, D.S.Bajaj

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.11


Modal Analysis of Spur Gear to Determine the Natural Frequencies and it’s effect over the Change in Material

Kadam G.N., Prof. D.S.Bajaj

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.12


A Comparative Study on Friction and Wear Behavior of PTFE Composites

Mr. P.D. Pansare, Prof. D. S. Bajaj

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.13


Tribological Evaluation of Vegetable oils as a Multi-cylinder Engine lubricant

Mr. A. S. Kalhapure, Prof. V. M. Mhaske, Prof. D. S. Bajaj

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.14


Effects of Deep Cryogenic Treatment on Wear Behavior of D6 Tool Steel

Prof. R.H.Naravade, Prof. R.K.Belkar, Prof. D.S.Bajaj

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.15


A Review on Effect of Surface Texturing on Tribological Behaviour of Polymer Composites

Navale R.A., Aher V.S., Nagare P.N., Bajaj D.S., Wakchaure P.B

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.16


Effect of Counter Surface Roughness on the Wear Mechanism of PTFE and PTFE Based Composites Liners in Aqueous Medium

P.S.Shivsharan, Bajaj D.S., A.K.Mishra

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.17


Active Vibration Suppression of Leaf Spring by using Piezoelectric Actuator

Khairnar N.D., Mhaske V.M, Aher V.S., Nagare P.N., Bajaj D.S.

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.18


Fabrication of Jute-PP and Wood Stock-PP composites and Comparison of their Physico-Mechanical Properties

Mr. G.V.Mahajan, Prof. V. S. Aher

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.19


An Investigation In to Sliding Wear Behaviour of Polyoxymethylene on Surface Textured Counter Face

Gophane Madhav B., Prof Aher V.S., Prof. (Dr).G.J.VikhePatil

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.20


A Review on Tribological Wear Behaviour of Journal Bearing on PEEK Composite Material

Mr. M. G. Deshmukh, Prof. V. S. Aher

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.21


Experimental Evaluation of Performance Parameters of Journal Bearing Operating in Boundary/ Mixed Lubrication Regimes

Pankaj D Shinde, P. N. Nagare

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.22


A Review on design, development, and analysis of compound die for Automobile component

Mr. Bhaskar F. Satpute, Prof. Mahesh S. Harne

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.23


Tribological Investigation of Polyamide (PA66) Composites with and without Effect of Surface Texturing

Pendbhaje G. S, Aher V. S, Gadakh S. T, Mishra A. K

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.24


A Review on Friction and Wear Behaviour of Polymer

S P Thorat, Prof. V S Aher, Prof. A K Mishra

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.25


A Review on Design Developments in Bicycle

R G Dhamak, Prof. P S Nagare, Prof. A K Mishra

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.26


Vibration Analysis of Tractor Seat on Flat Field With Different Accesories for Comfort Ride of a Driver

Prof. Mikhil K. Bhavsar, Prof. Vilas M. Mhaske

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.27


Sliding Wear Behaviour of Al-Si-Ti Alloys Using Taguchi Method under Lubrication Condition

Ganpat B. Jambukar, Pravin B. Wakchaure, Ranjit U. Kadlag

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.28


A Review on Effects of Filler materials on the Tribological Behaviour of PTFE Composites

Aher A.B., Nimbalkar S.R., Fargade S.C

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.29


A Review Paper on Fault Detection of Worm Gearbox

Sagar B Ghodake, Prof. A. K. Mishra, Prof. A. V. Deokar

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.30


Static and Fatigue Behavior of Steel and Glass Epoxy Composite Leaf Spring of Light Motor Vehicle

M.B. Shirke

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.31


Concorde-2: An Overview

Suhas Mali, Yash Muthe, Vikram Kolhe

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.32


Thermo structural analysis of Disc brake rotor

Amit Shinde, Prof. Eknath Bayas, Kishor Dagale, Kishor Deshmukh

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.33


Mechanical Characterization Of Carbon Fiber/Epoxy Composites With Variable Volume Fraction

Mr. Sachin M. Khomane, Prof. Laukik B. Raut

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.34


A Critical Review: Application of Epoxy-Non Metal Composite Material for Automobile Propeller Shaft

Mr. Prajit A. Man, Prof. Laukik B. Raut

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.35


Experimental Investigation Of Mechanical Properties Of Glass Fiber/Epoxy Composites With Variable Volume Fraction

Mr. Vishal S. Jagadale, Prof. Laukik B. Raut

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.36


Investigate the load carrying capacity of SAE 40 lubricating oils without using extreme pressure additives on four ball extreme pressure oil testing machine

Dighe Yogesh S, Pandharkar Ujjawala J

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.37


Performance Evaluation of Cotton Seed Oil as a Lubricant

N L Gunjal, Prof. D S Bajaj, Prof. A K Mishra

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.38


Design and Development of Stab-bar Assembly Machine

Pranit Purkar, Dhiraj Zatke, Khushal Suryawanshi, Chetan Shirole

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.39


Awareness of Lean manufacturing in plastic pipe industries- a survey

Javed G. Khan and Dr. R.S Dalu

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.40


Effect of Cutting Parameters on Surface Quality of Mild Steel (Grade A) in CNC Turning – A Case Study

Mr. Bombale Ravindra Ramesh, Prof. V. L. Kadlag, Prof. D. R. Mahajan

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.41


On the Influence of Cutting Parameters on Machined Surface Flatness in Precision Turning of Nickel Alloy

Ketan A. Jagtap, Rajendra V. Rupvate, Sanjay P. Muley

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.42


Magnetic Mould Casting: Methodology and Comparison with Traditional Sand Casting Process

Vishal Sadade, AmitDhake, Nishad Dixit, Prof. S. P. Deshpande

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.43


Die Design for Camshaft

Mr. D. J. Sangale, Prof. P. N. Nagare

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.44


Optimization of Process Parameters of Friction Stir Welding– Critical Review

Raktate Omesh, Dhananjay Dolas

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.45


A Parametric Study of Additive Manufacturing Process

Er. H. P. Pathade, Dr. P. C. Kulkarni

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.46


Spring Back Effect Analysis of Bracket Using Finite Element Analysis

Ravindra E. Gite, Kiran S. Phad, Dipak S. Bajaj

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.47


Sheet Metal Forming Simulation of Draw Panel Using FEM

A.S.Nasikkar, Prof. V.S.Aher

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.48


A Review on Wear Analysis of Wire Drawing Die

Zeeshan Pathan, Mahesh Harne

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.49


Analysis of Process Parameters in Hobbing using Optimization Technique

S. V. Shewale, Prof. S. R. Suryawanshi

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.50


Topology and Shape Optimization of Reamer

Biswajit Karmakar

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.51


Pareto Optimization Using Lean Manufacturing System In Technical Institute

Kavita K Kripalani

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.52


Behaviour of Ferromagnetic Materials In a Magnetic Field of a Permanent Magnet (The Law of Static Magnetism)

Krinav Makwana

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.53


Dropwise Condensation Heat Transfer Enhancement on Silver Coated Copper Surface using n-Heptane as Surfactant Additive

Ganesh B. Gore, N. V. Sali, Amrut B. Ghodake

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.54


Performance Evaluation of Vapour Compression System with R22 and Environment-Friendly Refrigerant

A.N. Korshetti, Dr.V.N.Raibhole, N.A. Kumbhar

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.55


Role of Electronic Controls in evolution of Refrigeration and Air Conditioning system

Shubhangi Kotkar, Balbhim Bansode

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.56


Heat transfer enhancement by jet impingement within channel

Chandrakant Rahane

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.57


Development of Methodology for Selection of Best Tribological Parameters for Hermetic Reciprocating Compressor

Borkar V.V., Chhapkhane N.K.

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.58


The use of dimensional analysis and optimization of pneumatic transportation operations and operating parameter

Ashok K. Mishra

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.59


Wall Thickness Analysis of Vapour Liquid Separator

Mr. Yogesh B. Khule, Prof. Dipak S. Bajaj

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.60


Effect of C.R. and load on Performance and Emission Parameters of VCR Diesel Engine

Prof. B.R.Varpe, Dr.Y.R.Kharde, Prof.N.H.Tambe

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.61


Application of Biomass Gasifier for Agricultural Electrification in Developing Countries as India

G.D. Patil, S.R.Wagh, K.N. Shinde, T.N.Patil, S. K. Amrutkar

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.62


Performance Characteristics Analysis of Jatropha-Diesel Blends in VCR Engine

Deepak Nibe, Nitin Tambe, Rakhmaji Gavahane, Omesh Raktate

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.63


Significance of Turbocharger on Performance of IC Engine: A Review

Professor. A.J. Gite, Professor. V.R.Lawande

Abstract | PDF with Text| DOI 10.17148/IARJSET/ICAME.64

Open chat