2nd International Conference on Advances in Mechanical Engineering
ICAME-2016
29th-30th March 2016
Organized by:
Amrutvahini College of Engineering, Sangamner
VOLUME 3, SPECIAL ISSUE 1, MARCH 2016
Aerospace Structures – Conventional Aircraft Wing Box Structure Reinforcement (Idealization) – FEA methodology – [Aerospace Structural Reinforcement]
Alfred J Lazarus
Abstract | 
| DOI 10.17148/IARJSET/ICAME.01
To study Effect of Crack on Natural Frequency by using FEA
Mr. Ganesh G. Gade, Mr. AmolS.Awari, Mr. Sachin S. Kanawade
Abstract | | DOI 10.17148/IARJSET/ICAME.02
Tractor Driven Soil Filtering Machine
Aniket Gadhave, Sank et Nirbhavane, Ashish Kothawade, Tejas Pardeshi, S. V. Dawange
Abstract | | DOI 10.17148/IARJSET/ICAME.03
Detection of Internal cracks in exhaust tailpipe using FFT Analyzer
Ms. Pallavi G. Kulkarni, Prof. D. S. Chaudhary
Abstract | | DOI 10.17148/IARJSET/ICAME.04
Design and fabrication of regenerative braking system
Chandrakant Rahane, Vaibhav Varpe
Abstract | | DOI 10.17148/IARJSET/ICAME.05
Optimization of Scorpio front suspension (W105) assembly line by using ECRS Principles
Shubham Kothavade, S.P. Deshpande
Abstract | | DOI 10.17148/IARJSET/ICAME.06
Weight Optimization of the Gear Train – A Review
M.S. Navle, Dr. A. V. Damale
Abstract | | DOI 10.17148/IARJSET/ICAME.07
Design and Modelling of 6 In 1 All – Nut Remover for Automobile Wheels
Amol Bhanage, Vijay Bhanage
Abstract | | DOI 10.17148/IARJSET/ICAME.08
Analysis and Optimisation of Robot Pedestal Design using FEA
Ashwini R. Hagawane, Vijay L. Kadlag
Abstract | | DOI 10.17148/IARJSET/ICAME.09
Performance Analysis of Shock Mounts Using FEA
R.S.Aralikatti, V.Y.Patil
Abstract | | DOI 10.17148/IARJSET/ICAME.10
Investigation of Wear and Load Carrying Capacity of Polyamide Composites for Gear Application
B.R.Ambre, D.S.Bajaj
Abstract | | DOI 10.17148/IARJSET/ICAME.11
Modal Analysis of Spur Gear to Determine the Natural Frequencies and it’s effect over the Change in Material
Kadam G.N., Prof. D.S.Bajaj
Abstract | | DOI 10.17148/IARJSET/ICAME.12
A Comparative Study on Friction and Wear Behavior of PTFE Composites
Mr. P.D. Pansare, Prof. D. S. Bajaj
Abstract | | DOI 10.17148/IARJSET/ICAME.13
Tribological Evaluation of Vegetable oils as a Multi-cylinder Engine lubricant
Mr. A. S. Kalhapure, Prof. V. M. Mhaske, Prof. D. S. Bajaj
Abstract | | DOI 10.17148/IARJSET/ICAME.14
Effects of Deep Cryogenic Treatment on Wear Behavior of D6 Tool Steel
Prof. R.H.Naravade, Prof. R.K.Belkar, Prof. D.S.Bajaj
Abstract | | DOI 10.17148/IARJSET/ICAME.15
A Review on Effect of Surface Texturing on Tribological Behaviour of Polymer Composites
Navale R.A., Aher V.S., Nagare P.N., Bajaj D.S., Wakchaure P.B
Abstract | | DOI 10.17148/IARJSET/ICAME.16
Effect of Counter Surface Roughness on the Wear Mechanism of PTFE and PTFE Based Composites Liners in Aqueous Medium
P.S.Shivsharan, Bajaj D.S., A.K.Mishra
Abstract | | DOI 10.17148/IARJSET/ICAME.17
Active Vibration Suppression of Leaf Spring by using Piezoelectric Actuator
Khairnar N.D., Mhaske V.M, Aher V.S., Nagare P.N., Bajaj D.S.
Abstract | | DOI 10.17148/IARJSET/ICAME.18
Fabrication of Jute-PP and Wood Stock-PP composites and Comparison of their Physico-Mechanical Properties
Mr. G.V.Mahajan, Prof. V. S. Aher
Abstract | | DOI 10.17148/IARJSET/ICAME.19
An Investigation In to Sliding Wear Behaviour of Polyoxymethylene on Surface Textured Counter Face
Gophane Madhav B., Prof Aher V.S., Prof. (Dr).G.J.VikhePatil
Abstract | | DOI 10.17148/IARJSET/ICAME.20
A Review on Tribological Wear Behaviour of Journal Bearing on PEEK Composite Material
Mr. M. G. Deshmukh, Prof. V. S. Aher
Abstract | | DOI 10.17148/IARJSET/ICAME.21
Experimental Evaluation of Performance Parameters of Journal Bearing Operating in Boundary/ Mixed Lubrication Regimes
Pankaj D Shinde, P. N. Nagare
Abstract | | DOI 10.17148/IARJSET/ICAME.22
A Review on design, development, and analysis of compound die for Automobile component
Mr. Bhaskar F. Satpute, Prof. Mahesh S. Harne
Abstract | | DOI 10.17148/IARJSET/ICAME.23
Tribological Investigation of Polyamide (PA66) Composites with and without Effect of Surface Texturing
Pendbhaje G. S, Aher V. S, Gadakh S. T, Mishra A. K
Abstract | | DOI 10.17148/IARJSET/ICAME.24
A Review on Friction and Wear Behaviour of Polymer
S P Thorat, Prof. V S Aher, Prof. A K Mishra
Abstract | | DOI 10.17148/IARJSET/ICAME.25
A Review on Design Developments in Bicycle
R G Dhamak, Prof. P S Nagare, Prof. A K Mishra
Abstract | | DOI 10.17148/IARJSET/ICAME.26
Vibration Analysis of Tractor Seat on Flat Field With Different Accesories for Comfort Ride of a Driver
Prof. Mikhil K. Bhavsar, Prof. Vilas M. Mhaske
Abstract | | DOI 10.17148/IARJSET/ICAME.27
Sliding Wear Behaviour of Al-Si-Ti Alloys Using Taguchi Method under Lubrication Condition
Ganpat B. Jambukar, Pravin B. Wakchaure, Ranjit U. Kadlag
Abstract | | DOI 10.17148/IARJSET/ICAME.28
A Review on Effects of Filler materials on the Tribological Behaviour of PTFE Composites
Aher A.B., Nimbalkar S.R., Fargade S.C
Abstract | | DOI 10.17148/IARJSET/ICAME.29
A Review Paper on Fault Detection of Worm Gearbox
Sagar B Ghodake, Prof. A. K. Mishra, Prof. A. V. Deokar
Abstract | | DOI 10.17148/IARJSET/ICAME.30
Static and Fatigue Behavior of Steel and Glass Epoxy Composite Leaf Spring of Light Motor Vehicle
M.B. Shirke
Abstract | | DOI 10.17148/IARJSET/ICAME.31
Concorde-2: An Overview
Suhas Mali, Yash Muthe, Vikram Kolhe
Abstract | | DOI 10.17148/IARJSET/ICAME.32
Thermo structural analysis of Disc brake rotor
Amit Shinde, Prof. Eknath Bayas, Kishor Dagale, Kishor Deshmukh
Abstract | | DOI 10.17148/IARJSET/ICAME.33
Mechanical Characterization Of Carbon Fiber/Epoxy Composites With Variable Volume Fraction
Mr. Sachin M. Khomane, Prof. Laukik B. Raut
Abstract | | DOI 10.17148/IARJSET/ICAME.34
A Critical Review: Application of Epoxy-Non Metal Composite Material for Automobile Propeller Shaft
Mr. Prajit A. Man, Prof. Laukik B. Raut
Abstract | | DOI 10.17148/IARJSET/ICAME.35
Experimental Investigation Of Mechanical Properties Of Glass Fiber/Epoxy Composites With Variable Volume Fraction
Mr. Vishal S. Jagadale, Prof. Laukik B. Raut
Abstract | | DOI 10.17148/IARJSET/ICAME.36
Investigate the load carrying capacity of SAE 40 lubricating oils without using extreme pressure additives on four ball extreme pressure oil testing machine
Dighe Yogesh S, Pandharkar Ujjawala J
Abstract | | DOI 10.17148/IARJSET/ICAME.37
Performance Evaluation of Cotton Seed Oil as a Lubricant
N L Gunjal, Prof. D S Bajaj, Prof. A K Mishra
Abstract | | DOI 10.17148/IARJSET/ICAME.38
Design and Development of Stab-bar Assembly Machine
Pranit Purkar, Dhiraj Zatke, Khushal Suryawanshi, Chetan Shirole
Abstract | | DOI 10.17148/IARJSET/ICAME.39
Awareness of Lean manufacturing in plastic pipe industries- a survey
Javed G. Khan and Dr. R.S Dalu
Abstract | | DOI 10.17148/IARJSET/ICAME.40
Effect of Cutting Parameters on Surface Quality of Mild Steel (Grade A) in CNC Turning – A Case Study
Mr. Bombale Ravindra Ramesh, Prof. V. L. Kadlag, Prof. D. R. Mahajan
Abstract | | DOI 10.17148/IARJSET/ICAME.41
On the Influence of Cutting Parameters on Machined Surface Flatness in Precision Turning of Nickel Alloy
Ketan A. Jagtap, Rajendra V. Rupvate, Sanjay P. Muley
Abstract | | DOI 10.17148/IARJSET/ICAME.42
Magnetic Mould Casting: Methodology and Comparison with Traditional Sand Casting Process
Vishal Sadade, AmitDhake, Nishad Dixit, Prof. S. P. Deshpande
Abstract | | DOI 10.17148/IARJSET/ICAME.43
Die Design for Camshaft
Mr. D. J. Sangale, Prof. P. N. Nagare
Abstract | | DOI 10.17148/IARJSET/ICAME.44
Optimization of Process Parameters of Friction Stir Welding– Critical Review
Raktate Omesh, Dhananjay Dolas
Abstract | | DOI 10.17148/IARJSET/ICAME.45
A Parametric Study of Additive Manufacturing Process
Er. H. P. Pathade, Dr. P. C. Kulkarni
Abstract | | DOI 10.17148/IARJSET/ICAME.46
Spring Back Effect Analysis of Bracket Using Finite Element Analysis
Ravindra E. Gite, Kiran S. Phad, Dipak S. Bajaj
Abstract | | DOI 10.17148/IARJSET/ICAME.47
Sheet Metal Forming Simulation of Draw Panel Using FEM
A.S.Nasikkar, Prof. V.S.Aher
Abstract | | DOI 10.17148/IARJSET/ICAME.48
A Review on Wear Analysis of Wire Drawing Die
Zeeshan Pathan, Mahesh Harne
Abstract | | DOI 10.17148/IARJSET/ICAME.49
Analysis of Process Parameters in Hobbing using Optimization Technique
S. V. Shewale, Prof. S. R. Suryawanshi
Abstract | | DOI 10.17148/IARJSET/ICAME.50
Topology and Shape Optimization of Reamer
Biswajit Karmakar
Abstract | | DOI 10.17148/IARJSET/ICAME.51
Pareto Optimization Using Lean Manufacturing System In Technical Institute
Kavita K Kripalani
Abstract | | DOI 10.17148/IARJSET/ICAME.52
Behaviour of Ferromagnetic Materials In a Magnetic Field of a Permanent Magnet (The Law of Static Magnetism)
Krinav Makwana
Abstract | | DOI 10.17148/IARJSET/ICAME.53
Dropwise Condensation Heat Transfer Enhancement on Silver Coated Copper Surface using n-Heptane as Surfactant Additive
Ganesh B. Gore, N. V. Sali, Amrut B. Ghodake
Abstract | | DOI 10.17148/IARJSET/ICAME.54
Performance Evaluation of Vapour Compression System with R22 and Environment-Friendly Refrigerant
A.N. Korshetti, Dr.V.N.Raibhole, N.A. Kumbhar
Abstract | | DOI 10.17148/IARJSET/ICAME.55
Role of Electronic Controls in evolution of Refrigeration and Air Conditioning system
Shubhangi Kotkar, Balbhim Bansode
Abstract | | DOI 10.17148/IARJSET/ICAME.56
Heat transfer enhancement by jet impingement within channel
Chandrakant Rahane
Abstract | | DOI 10.17148/IARJSET/ICAME.57
Development of Methodology for Selection of Best Tribological Parameters for Hermetic Reciprocating Compressor
Borkar V.V., Chhapkhane N.K.
Abstract | | DOI 10.17148/IARJSET/ICAME.58
The use of dimensional analysis and optimization of pneumatic transportation operations and operating parameter
Ashok K. Mishra
Abstract | | DOI 10.17148/IARJSET/ICAME.59
Wall Thickness Analysis of Vapour Liquid Separator
Mr. Yogesh B. Khule, Prof. Dipak S. Bajaj
Abstract | | DOI 10.17148/IARJSET/ICAME.60
Effect of C.R. and load on Performance and Emission Parameters of VCR Diesel Engine
Prof. B.R.Varpe, Dr.Y.R.Kharde, Prof.N.H.Tambe
Abstract | | DOI 10.17148/IARJSET/ICAME.61
Application of Biomass Gasifier for Agricultural Electrification in Developing Countries as India
G.D. Patil, S.R.Wagh, K.N. Shinde, T.N.Patil, S. K. Amrutkar
Abstract | | DOI 10.17148/IARJSET/ICAME.62
Performance Characteristics Analysis of Jatropha-Diesel Blends in VCR Engine
Deepak Nibe, Nitin Tambe, Rakhmaji Gavahane, Omesh Raktate
Abstract | | DOI 10.17148/IARJSET/ICAME.63
Significance of Turbocharger on Performance of IC Engine: A Review
Professor. A.J. Gite, Professor. V.R.Lawande
Copyright Form