📞 +91-7667918914 | ✉️ iarjset@gmail.com
International Advanced Research Journal in Science, Engineering and Technology
International Advanced Research Journal in Science, Engineering and Technology A Monthly Peer-Reviewed Multidisciplinary Journal
ISSN Online 2393-8021ISSN Print 2394-1588Since 2014
IARJSET aligns to the suggestive parameters by the latest University Grants Commission (UGC) for peer-reviewed journals, committed to promoting research excellence, ethical publishing practices, and a global scholarly impact.
← Back to VOLUME 13, ISSUE 11, NOVEMBER 2026

Effect of Fibres on the Properties of Concrete.

Tejal Ingle, Meghna Patankar*

👁 2 views📥 0 downloads
Share: 𝕏 f in ✈ ✉
Abstract: Concrete is inherently brittle with low tensile strain capacity, leading to microcracking and sudden cataclysmic failure under overload. Fibre-reinforced concrete (FRC) mitigates these structural shortcomings through the introduction of discrete micro- and macro-fibres into the cementitious matrix. This paper presents a detailed critical review of ten representative case studies covering steel, polypropylene, synthetic, natural, bio-derived, and hybrid fibre systems. The synthesis demonstrates that while compressive strength exhibits variable or negligible gains depending on packing density and air entrainment, tensile strength, flexural toughness, postcracking residual capacity, and impact energy absorption are dramatically improved via crack-bridging and pull-out mechanisms. Key operational challenges including workability reduction, fibre balling, hydrophobic interface limitations, and matrix degradation are thoroughly evaluated alongside standardized testing protocols and durability implications.

Keywords: Fibre-reinforced concrete; Steel fibres; Polypropylene fibres; Natural fibres; Impact resistance; Post- cracking toughness; Flexural performance; Multi-scale crack bridging.

How to Cite:

[1] Tejal Ingle, Meghna Patankar*, “Effect of Fibres on the Properties of Concrete.,” International Advanced Research Journal in Science, Engineering and Technology (IARJSET), DOI: 10.17148/IARJSET.2026.131112

Creative Commons License This work is licensed under a Creative Commons Attribution 4.0 International License.